Fabricated filter housings that filter intake air for engines, gas turbines, blowers, centrifugal and axial compressors, both rectangular and round in shape.
The fabrication of an exhaust muffler for use in suppressing the exhaust noise of all large internal -combustion equipment.
Chamber and Acoustical type silencers that silence combustion exhaust gases from air breathing equipment
Engine/Equipment enclosures for means of isolating engine equipment noise. All sizes and shapes made to your design, both panels or modules.
Fabricators of Silencers for both intake and exhaust noise from high speed fans, blowers and turbines, all sizes and shapes with HI TEMP ratings.
Fabricated Filter Housing that filter and silence intake air for air breathing Combustion Engines, Gas Turbine Blowers, Centrifugal and Axial Compressors, all shapes and sizes, round and rectangular both chamber and acoustic in application.
Designed for use on naturally aspirated and turbocharged engines, gas turbine intakes, and other similar types of air breathing equipment.
A silencer that is directly coupled to a control valve. It controls pressure and aerodynamic noise using both reactive and acoustic absorption principles.
Inline Diffusers control the thrust of high velocity turbulent flow of gases and liquids using reactive principles in both pressure control and pressure retention.
Mufflers fabricated to reduce engine exhaust noise to community acceptable levels. Any sizes shapes or horse powers.
Fabricator of silencers for low pressure centrifugal fans and vacuum pumps. For intake and discharge pulse noise control and silencers for vacuum pump water separators.
Blowdown Steam Venting Silencers that silence excessive noise while venting, with dissipating diffusing elements and acoustical absorption modules. Fabricated to your design.
Vent Blowdown Silencers that quiet excessive noise generated by high pressure, high velocity gases that are vented into the atmosphere both chamber and acoustical type silencers
Vent blowdown acoustical mufflers are blowdown mufflers that quiet excessive noise generated by high pressure, high velocity gases that are vented into the atmosphere. Using acoustical packing with heat ratings of 1000 DEG. F. Packed to a density sufficient to obtain the specified acoustical performance.
A vent silencer is a device that is intended to muffle or reduce the very high noise levels created when high-pressure gas or steam is expanded to atmosphere. This noise is produced by the rapid turbulence of the mixing gas jet and energy release of the compressed gas. Most of the noise occurs at the expansion across the valve and is emitted at the stack opening. The silencer is installed at the exit to muffle this noise.
There are two noise reduction principles used in vent silencer. The first is absorption of the high frequency audible noise into a sound absorbing material. The second principle is reactive section to attenuate the low frequencies and provide broad band noise reduction.